Effective environmental remediation
In connection with demolition, it is crucial that you locate any environmentally hazardous substances by means of an environmental screening of your buildings and possible environmental remediation.
Allan Ploug offers effective lead and asbestos abatement in Copenhagen and North Zealand. Environmentally hazardous substances must be removed and disposed of professionally and in accordance with applicable environmental remediation requirements and legislation in order to ensure that they do not end up in nature.
If you burn materials such as asbestos, PCBs and mould, you release hazardous substances that end up in nature. They are absorbed into the food chain and thus end up in the human body. An environmental screening of buildings – in the form of a lead, PCB and asbestos analysis – can reveal whether there are environmental toxins and whether PCB remediation or lead or asbestos abatement is required.
Contact us for advice and guidance or to get a quote
Professional advisory services and handling of environmentally hazardous substances
Environmentally hazardous substances are suspected of causing everything from mild headaches to cancer and reduced fertility – that’s why it is incredibly important that you know how to remove these substances correctly with professional environmental remediation.
At Allan Ploug A/S, we have many years of experience advising, screening and removing environmentally hazardous substances that can be found in old buildings. Want to hear more about environmental remediation? Contact us by phone on +45 36 45 36 36 or fill out the contact form for a quote for environmental screening or asbestos abatement in Copenhagen or North Zealand, or just to hear more.
Extensive experience in removing environmentally hazardous substances
Environmental remediation is about removing substances that are hazardous to health and the environment in the most appropriate way. In 1987, Allan Ploug A/S started with asbestos abatement, effectively and safely removing asbestos in i.a. insulation. Since then, we have expanded our expertise to removal of mould, PCBs and environmentally hazardous substances such as cadmium, chromium, copper, nickel, zinc, lead, mercury and more.
We specialise in the identification, remediation and disposal of toxic substances. With the right crew, and the required equipment, we ensure that environmentally hazardous materials end up in the right place at the right time.
If your building is going to be demolished and you need professional environmental remediation, we are always available.
Environmental screening of buildings and registration
At Allan Ploug A/S, we have extensive knowledge and expertise regarding environmentally hazardous substances and can thus advise in all aspects within this area. In addition to this, we can also carry out screenings and registration of asbestos, PCBs, heavy metals cadmium, chromium, copper, nickel, zinc, lead, mercury and more.
Asbestos screening:
We can review and check buildings, construction sites, areas or the like for asbestos-containing materials. We have extensive knowledge about which materials asbestos can be found in, which is why we can more easily take relevant samples in places where there may be doubts about the material. All samples are sent to an independent and recognised institute to verify possible asbestos content.
Asbestos registration:
When performing conversion and demolition, the client is required to register asbestos by law. In places with asbestos-containing sheets, pipe insulation and where people stay, it is a good idea to draw up an actual asbestos report.
Allan Ploug A/S prepares reports for both the client directly and for consultants. We can offer a fixed price for an asbestos registration and, at the same time, prepare a plan and budget if this is desired.
PCB screening:
We can review and check buildings, construction sites, areas or similar for PCB-containing materials. We have extensive knowledge about which materials PCBs can be found in, which is why we can more easily take relevant samples in places where there may be doubts about the material. All samples are sent to an independent and recognised institute to verify possible PCB content.
PCB registration:
When performing conversions and demolitions, the client is required by law to register PCBs. In places where there are PCB-containing joints, where PCBs have penetrated into the concrete and where people are, it is recommended to draw up an actual PCB report.
Allan Ploug A/S prepares reports for both the client directly and for consultants. We can offer a fixed price for a PCB registration and prepare a plan and budget for a subsequent remediation, if desired.
Screening of fungal infestation:
We offer a review of buildings, construction sites, homes or the like for fungal infestations, including mould, serpula lacrymans, wet rot, white pore fungus, ceratocystis picea and other harmful organisms. We have extensive knowledge of the materials in which mould can arise, which is why we can more easily take relevant samples in cases of doubt.
All samples are sent to an independent and recognised institute to verify which fungal species the building is infested with.
Registration of fungal infestation:
Allan Ploug A/S prepares many reports in connection with registration tasks in renovation projects. We can offer a fixed price for a registration of fungal infestations, including mould, serpula lacrymans, wet rot, white pore fungus, ceratocystis picea and other harmful organisms. At the same time, we can also enter into collaborations with client consultants, architects and engineers for the preparation of job descriptions, work environment plans, work schedule and budgets, if desired.
We have the expertise and can handle the task from A–Z
Effective environmental remediation requires thoroughness, expertise and not least the right tools for the specific task. As more and more materials are suspected of having harmful properties, it is crucial that you stay up to date with the right knowledge and skills.
Our expertise in environmental remediation makes us a good choice for those who want a serious partner who is involved in all parts of the process. As we offer total solutions, we are happy to take care of everything from official treatment and approval to the removal of the last waste, as well as a thorough exit cleaning.
We carry out all tasks in accordance with current guidelines and legislation, just as we have been approved for the transport of environmentally hazardous waste. In other words, we ensure that the disposal of environmentally hazardous materials is carried out with an extraordinary focus on safety, quality and efficiency.
Need help with environmental remediation?
At Allan Ploug A/S, we are ready to help with virtually all types of environmental remediation. Not only have we been approved to dispose of environmentally hazardous waste, but we have also been approved to demolish buildings. There is often a great financial advantage to having the demolition and remediation carried out by the same company – and for this, we are a good choice.
We are happy to analyse the building and clarify where, and in what quantities, the environmentally hazardous substances are found. Then we can provide a non-binding quote for a total solution where we handle all aspects of the project. If you need a professional and efficient partner, you are therefore more than welcome to contact us for a price for environmental remediation or asbestos abatement in Copenhagen and North Zealand.
Contact us by phone on +45 36 45 36 36 or fill out the contact form to hear more.